Overview

Recommended Hardware

Any device with a barcode reader, internet access, and that support an SSH connection will serve. In order to efficiently scan fresh cut flower boxes, a pistol grip scanner would be the best option.  Regardless of the make and model heavy duty equipment should be used in order to survive the conditions in the warehouse.

Wi-Fi

The scanning application runs in real time and therefore, it needs to be connected to the internet in order to run. We strongly suggest that you perform a Wi-Fi site survey in your warehouse(s) with a company that has experience with wireless infrastructure.

.

SSH Setup

Komet Sales uses a text based application that is executed via SSHconnection.  In order to SSH connection.  To connect to the scanning server, you will need a terminal program running on the scanner with SSH support (i.e.: TelnetCE, Wavelink or others).  Once you have the software on the scanner you will need to create a profile which will require the following information:

• Host (the IP address of the scan server)
• User
• Password
• Port
  
  
  

Server Settings

• Host: 174.129.20.191
• Port: 22 (SSH)

Scanner Setup Settings

Warning
title Important
The next instructions apply for the Motorola Symbol CRD 9000-1000. They may vary considerably depending on the device model.

 

To setup the scanner, follow these instructions:

Ui steps
size small
Ui step Open the TelnetCE or WaveLink program (Start >> Programs) in the scanner. Ui step  Hit "Options" on the bottom left hand corner. Ui step  Go to Configure >> Host Profiles. Ui step  Use "SYSTEM" as password (case sensitive). Ui step  If the profile exists, select it and select "Edit".  If it does not exist select "Add". Ui step  Configure the profile. Alias: The name of the profile.  Example: Your Company Name. Emulation: Choose VT220 from the list. Address: The scan server IP address. Check the "Use SSH Encryption" checkbox (this requires the SSH extension is installed). Port: 22 (the SSH port). Click "Save". Ui step  The system will now open the "Configuration" options for the profile where you will be able to configure the following settings under each of these tabs (everything else stays with the defaults): SSH Autologin Name: the SSH username that's used to connect to the SSH server. Password: the SSH password. Display Uncheck the "Vertical Scrollbar" and "Horizontal Scrollbar". Ui step Hit the "OK" button on the upper right hand corner of the screen. Ui step Click on the Save button from the "Edit Host Profile" window. Ui step  Choose the new or updated profile from the "Edit Host Profile" window and click Done. Emulation: VT220

 

Scanner Setup SSH Support